Pharma Test - Ampoule Breakpoint Tester 安瓿瓶斷點測試儀 1

Pharma Test - Ampoule Breakpoint Tester 安瓿瓶斷點測試儀

加入詢問車
產品說明
Pharma Test Ampoule Breakpoint Tester PTBA 211E
安瓿瓶斷點測試儀

PTBA 211E安瓿斷點測試儀的設計和製造符合DIN EN ISO <9187-1 / 2：2010>標準。根據該標準，必須測試安瓿的斷點以控制空安瓿生產期間和填充過程之前的質量。


Technical Specifications

Parameter Specification
Display LED Display showing number of tests and breakpoint result
Data Entry Numerical and Functional keys
Standard Force Range 5.0 to approximately 300N (optional 500N)
Accuracy < 1N
Resolution 0.074N (300N model) – 0.1482N (500N model)
Force Settings Linear speed or linear force increase (standard setting: linear speed 10mm/Min)
Selectable Range 4.0 – 200 Millimeter/Minute or 5.0 – 200 N/Second
Accuracy < 2% force or < 0.1% speed
Printer Parallel Interface to connect Dot-Matrix or PCL 5 Printer
Interface RS232 COM port
Calibrations Multiple point for load cell precision using certified weights (PT-CAL15/30 and PT-CAL 50)
Calibration Guidance Built-in calibration procedures the digital load cell
Adjustments Two point adjustment – zero and 10kg
Force Detection Reproducibility PT-MT3 Magnetic Tablet and suitable support
Instrument Housing Stainless Steel (312) to meet GLP requirements
Bench Space Requirement L 30cm x W 30cm x H 48cm (without external printer )
Certification All components certified to DIN EN ISO requirements
CE / EMC Certification All CE / EMC Certification provided
Validation All IQ & OQ documents included
回上層